*Rims and aluminum alloy rims do not rust
*Sealing diameter: 7mm
*Extend tire service life: suitable for both tubeless tires and inner tubes
*Reduce the risk of tire blowout: does not damage rims or aluminum alloy rims
*Scope of application: tires of bicycles, motorcycles and electric vehicles
*Dosage: Bicycle: 200ml per tire * Motorcycle: 400ml per tire
P.S. After adding the tire sealant and inflating, if air leakage is found, rotate the tire so that the air leakage port is perpendicular to the ground.
*Instructions for use:
1.Use a valve core wrench to loosen the valve core inside the air inlet.
2.Take out the valve core and deflate the tire completely.
3.Shake the tire sealant well, then take out the catheter from the back and install it.
4.Turn the air inlet to the 8 o'clock position and connect the catheter.
5.Squeeze the bottle hard to inject the tire sealant, then rotate the tire.
6.Clean the air inlet, screw on the valve core, and inflate the tire to the standard pressure.
7.Successfully sealed, the tire remains fully inflated.
